Door panel facing upwards: Use a Phillips screwdriver to turn left and loosen all self tapping screws connecting the upper and lower hinges to the cabinet side panel. Move the door panel down to the appropriate position and hold it with your left hand. Use your right hand to turn the Phillips screwdriver clockwise and tighten the screws;
The door panel of the left opening door is biased to the left: Use a Phillips screwdriver to rotate it to the left to adjust the distance from the first screw on the door panel hinge. The door panel can be moved to the right, and close the door to check until the gap between the left and right is even;
The door panel of the left door is biased to the right: Use a Phillips screwdriver to rotate it to the right and adjust the distance from the first screw on the door panel hinge. The door panel can be moved to the left. Close the door and check until the gap between the left and right is even;
The door panel of the right opening door is biased to the left: Use a Phillips screwdriver to rotate it to the right and adjust the distance from the first screw on the door panel hinge. The door panel can be moved to the right. Close the door and check until the gap between the left and right is even;
The door panel of the right opening door is biased to the right: Use a Phillips screwdriver to rotate it to the left to adjust the distance from the first screw on the door panel hinge. The door panel can be moved to the left. Close the door and check until the gap between the left and right is even;
The gap between the upper or lower part of the door panel and the side panel is less than 2MM: Use a Phillips screwdriver to rotate to the left and loosen the second screw on the door panel hinge, pull the door panel outward to an appropriate distance, use a Phillips screwdriver to rotate to the right and tighten the second screw on the door panel hinge, close the door and check until the gap between the upper and lower parts is even and 2MM;
If the gap between the upper or lower part of the door panel and the side panel is greater than 2MM: Use a Phillips screwdriver to rotate to the left to loosen the second screw on the hinge of the door panel, push the door panel inward to an appropriate distance, and use a Phillips screwdriver to rotate to the right to tighten the second screw on the hinge of the door panel. Close the door and check until the upper and lower gaps are evenly 2MM.
